Separate radio and network problems
- Confirm the access point offers 2.4 GHz 802.11 b/g/n service. SB1000 cannot join a 5 GHz-only network.
- Check SSID/password and whether the intended Wi-Fi mode is active.
- Compare reception outside the metal cabinet or with the access point temporarily nearer. A metal enclosure can substantially reduce signal.
- Check the actual DHCP/static address, subnet, gateway, and DNS. If Wi-Fi joins but local clients cannot reach SB1000, investigate routing or client isolation.
- Compare using Ethernet to determine whether the fault is limited to Wi-Fi.
- On a heavily configured unit, check resource status and other active services. Wi-Fi consumes memory, but there is no universal point-capacity deduction that applies to every configuration.
Expected result
The unit joins the intended network and remains reachable with acceptable signal conditions. If the cabinet prevents reliable radio operation, use Ethernet or revise the access-point/enclosure arrangement. Record access-point model, location/signal observations, firmware, and the exact connection stage that fails.
